Blog

In the poultry industry, light management is a key factor affecting poultry health, growth and poultry production efficiency. However, traditional poultry lighting has been difficult to meet the needs of modern farming due to high energy consumption, inaccurate regulation and maintenance costs. In contrast, modern intelligent poultry lighting, with the advantages of high efficiency and energy saving, intelligent regulation and accurate management, is gradually becoming a new standard in the industry.    (Image source: Pexels)   How big is the gap between traditional lighting and intelligent lighting? Let's reveal the secret of how intelligent lighting brings higher returns and lower costs to farmers through comparison!   1. High energy consumption and large electricity cost Traditional lighting (such as incandescent lamps, fluorescent lamps) has high energy consumption, large electricity costs, and high long-term use costs. Modern intelligent lighting uses energy-efficient LED technology to reduce energy consumption by more than 30% and significantly save electricity bills.   2. Illumination regulation is not accurate Traditional lighting can not accurately control the light intensity, spectrum and cycle, it is difficult to meet the needs of different growth stages of poultry. Modern smart lighting supports intelligent dimming and automatic control, which can accurately adjust the lighting according to the needs of poultry.   3. Flicker problem, affecting poultry health There are flicker problems in traditional lighting, which can easily lead to visual fatigue and stress reaction of poultry, affecting growth and egg production rate. Modern intelligent lighting uses flicker-free design to protect poultry visual health and reduce stress.   4. Short service life and high maintenance cost Traditional lighting fixtures have a short life, are easily damaged, and need to be replaced frequently, increasing maintenance costs and time. Modern smart lighting uses durable materials with a service life of more than 5 years, reducing the frequency of maintenance.   5. Inability to adapt to harsh environments Traditional lighting fixtures have poor waterproof and dust-proof performance, and are easily damaged in wet and dusty farming environments. Modern intelligent lighting with waterproof, dustproof, corrosion resistant design, adapt to a variety of harsh environments.   6. Lack of intelligent management Traditional lighting requires manual control, time consuming, low management efficiency. Modern intelligent lighting supports remote monitoring and automated operation, reducing manual intervention and improving management efficiency.   7. Security risks Traditional lighting has safety hazards such as leakage and short circuit, which threaten the safety of poultry and employees. Modern intelligent lighting uses low-voltage design, safe and reliable, to avoid security risks.   8. Data analysis is not possible Traditional lighting cannot record and analyze lighting data, making it difficult to optimize light management. Modern intelligent lighting supports data recording and analysis to help farmers scientifically optimize lighting schemes.   9. Uneven lighting The unreasonable distribution of traditional lighting fixtures easily leads to uneven lighting, which affects the growth and production performance of poultry. Modern intelligent lighting can be customized according to the layout of the farm lighting solutions to ensure a uniform distribution of light.   10. Poor environmental protection Traditional lighting has high energy consumption and large carbon emissions, which is not in line with the trend of green farming. Modern intelligent lighting energy saving and environmental protection, reduce carbon emissions, help sustainable development.   In summary, the traditional poultry lighting in energy consumption, management, safety, environmental protection and other aspects of the obvious drawbacks, and modern poultry intelligent lighting through the advantages of energy saving, intelligent, precise regulation, effectively solve these problems, to provide farmers with a more efficient and more economical solution.    Good Light Technology's latest intelligent poultry lighting products are in line with the above mentioned modern poultry intelligent lighting. It has low voltage design. It is designed for water, dust and corrosion resistance. It features a flicker-free design and durable materials. It uses energy-efficient LED technology. It supports intelligent dimming and automated control. It supports remote monitoring and automated operation. It supports data logging and analysis. It saves energy and it is environmentally friendly. It can customize the lighting solutions according to the farm layout. It is a star product with a very high return on investment. If your farm is also facing the trouble and confusion caused by traditional lighting, choose smart poultry lighting, it will give you a different farming new future!    

Lighting duration is a crucial factor in breeding management, which directly affects the growth, reproduction, behavior and health status of animals. Different kinds of animals have different needs for light, and scientific and reasonable arrangement of lighting duration can significantly improve breeding efficiency and animal welfare. The following are the main effects of different lighting duration on farming.   （Image source:Pexels）   1.Effect on growth performance   *Appropriate lighting duration: can promote the metabolism of animals, improve feed conversion, accelerate growth.   *Too long lighting duration: may cause animals to be overactive, consume too much energy, but affect growth.   *Too short light duration: may inhibit the animal's appetite and activity, resulting in slow growth.   2.Effect on reproductive performance   *Poultry (e.g. chickens)    Increase the lighting duration: can stimulate the gonad development of hens, improve the egg production rate. A cycle of 16 hours of lighting and 8 hours of darkness is usually used.    Reduce lighting duration: May result in a decrease in egg production or even stop egg production.   *Mammals (e.g. pigs)    Appropriate lighting duration: helps to regulate the estrus cycle of sows and improve reproductive efficiency.    Too short light duration: may delay the sow's estrus and affect reproductive performance.   3.Effect on behavior   *Regular lighting cycles: help animals develop a stable biological clock and reduce stress responses.   *Sudden changes in lighting: May cause anxiety, increased aggression, or decreased appetite in animals.   *Excessive lighting duration: May make the animal overactive, increasing the risk of fighting and injury.   4.Effect on immunity   *Appropriate lighting: can enhance the immunity of animals, reduce the incidence of disease.   *Too short lighting duration: May suppress immune system function and increase the risk of disease.   *Too long lighting duration: may lead to animal fatigue, reduced immunity.   5.Effect on feed utilization   *Appropriate lighting duration: can promote the regular feeding of animals, improve feed utilization.   *Too short lighting duration: may reduce animal feed intake, affecting growth and reproduction.   *Excessive lighting duration: May cause animals to expend excessive energy and reduce feed conversion.   6.Effect on meat quality and egg quality   *Poultry    Appropriate lighting duration: can improve eggshell quality and egg nutrients.    Too long lighting duration: may lead to eggshell thinning, egg quality decline.   *Mammal    Appropriate lighting duration: helps to improve meat quality, increase muscle fat content and taste.    Too short lighting duration: may lead to poor meat quality and insufficient fat deposition.   7.Effect on animal welfare   *Appropriate lighting duration: can improve animal comfort and happiness, reduce abnormal behavior (such as feather pecking, tail biting, etc.).   *Too short lighting duration: May cause depression and abnormal behavior in animals.   *Too long lighting duration: may make animals tired and affect their normal rest.   8.Effect on economic efficiency   *Scientific lighting management: can improve breeding efficiency, reduce feed costs and medical costs, increase economic benefits.   *Unreasonable lighting time: may lead to slow growth, low reproductive efficiency and frequent diseases, increasing breeding costs.   Conclusion Scientific and reasonable arrangement of lighting time is the key to improve breeding efficiency and animal welfare. Different kinds of animals have different needs for light, and farmers should formulate appropriate Lighting Solutions according to the types of animals, growth stages and breeding objectives.   Xiamen Good Light Technology Ltd. is a company that specializes in poultry and livestock farming lighting solutions design and R&D, production and sales of poultry and livestock lighting products. Our latest product intelligent farming lighting system, it is not only a lighting duration control system ,but also a lighting management control system. Through accurate lighting management, it can improve the growth rate and reproductive performance of animals, improve the quality of meat and eggs, reduce the incidence of disease, and ultimately maximize economic benefits.    

With a growing global population and increasing consumer demand for high-quality protein, the broiler farming industry is undergoing unprecedented change. As an efficient and sustainable production mode, large-scale farming is becoming the mainstream trend of modern broiler production. This blog will discuss the advantages of large-scale farming, key technologies, and future development directions.   First, the advantages of large-scale farming *Improve production efficiency Large-scale farming has significantly improved production efficiency through centralized management, automated equipment and scientific feeding. Compared with the traditional free-range model, large-scale farming can significantly reduce labor costs and achieve a higher slaughtering rate.   *Ensure food safety Large-scale farming enterprises usually adopt strict health management and quality control system, from feed, water to breeding environment, to ensure the safety of chicken products. In addition, large-scale farming also facilitates the implementation of a whole-process traceability system to ensure that the source of the product can be checked and the destination can be traced.   *Reduce production costs Through centralized procurement of feed, vaccines and other production materials, large-scale farming can effectively reduce production costs per unit of product. At the same time, the application of automation equipment also reduces the waste of energy and resources.   *Promote sustainable development Large-scale farming enterprises pay more attention to environmental protection and resource utilization efficiency. For example, the conversion of breeding waste into organic fertilizer or biogas through manure treatment technology not only reduces environmental pollution, but also realizes the recycling of resources.   Second, the key technology of large-scale farming *Automation equipment Modern large-scale farms widely use automated feeding, drinking, cleaning and environmental control systems. These devices not only improve production efficiency, but also reduce the error and risk caused by human operation.   *Scientific feeding management Large-scale farming relies on scientific feeding management techniques, including precise nutritional formulations, staged feeding and disease prevention. Through data analysis and technical optimization, farming companies are able to achieve higher feed conversion rates and growth rates.   *Environmental control technology Large-scale farms are usually equipped with advanced temperature and humidity control, ventilation and lighting systems to provide the most suitable growing environment for broilers. This not only improves the health of the chickens, but also reduces the incidence of disease.   *Epidemic prevention and control system Large-scale farming enterprises have established a sound disease prevention and control system, including regular vaccination, biosecurity measures and epidemic surveillance. These measures have effectively reduced the risk of disease outbreaks and ensured the stable operation of farms.   （This image is from the Internet.）   Third, the future development direction of large-scale farming *Intelligent breeding With the development of the Internet of Things, big data and artificial intelligence technology, intelligent farming will become the mainstream trend in the future. Through real-time monitoring and data analysis, farming companies can more accurately manage the production process, further improving efficiency and product quality.   *Green breeding Consumers' demand for green and healthy food continues to grow, promoting the development of large-scale farming in the direction of green and environmental protection. For example, the promotion of organic feed and ecological cycle models will become an important direction in the future.   *Integration of the whole industrial chain Large-scale farming enterprises will further extend upward and downstream, forming a whole industry chain model from breeding chickens, feed production to slaughter and processing, and food sales. This not only improves the enterprise's anti-risk ability, but also enhances the market competitiveness.   *International cooperation and standardization With the acceleration of globalization, large-scale farming enterprises will strengthen cooperation with international advanced enterprises and introduce advanced technology and management experience. At the same time, promote the standardization of the industry and enhance the international competitiveness of broiler products.   Large-scale farming is the inevitable choice for modern broiler production, which not only improves production efficiency and product quality, but also provides strong support for the sustainable development of the industry. For poultry farming companies, seizing this trend, continuous innovation and optimization will be the key to winning the future market.   While on the road to large-scale farming, improving poultry lighting is an essential part. Now using our latest Poultry Lighting Control series products, you can easily achieve Intelligent Management Of Poultry Lighting, including brightness adjustment, time determination, color temperature change, single area control, etc. By using our poultry lighting control products, you can improve production efficiency and reduce the error and risk caused by human operation, further increase the production efficiency of poultry farming.      

In modern poultry farming, light management is a crucial aspect. Poultry farm lighting not only provides necessary illumination for birds but also enhances their growth rate, egg production, and overall health through scientific light regulation. This article explores the importance of poultry farm lighting and its practical applications in farming.   1. The Impact of Light on Poultry Light is a significant factor influencing the physiology and behavior of poultry. Appropriate light stimulates the visual system of birds, thereby affecting their endocrine system and promoting the secretion of growth hormones. For laying hens, the duration of light directly affects their laying cycle. For instance, extending light exposure can stimulate ovarian development, thereby increasing egg production. For broilers, proper lighting can enhance their appetite and accelerate growth.   2. Types of Poultry Farm Lighting The commonly used types of lighting in poultry farms include: LED Lights: LED lights are energy-efficient, long-lasting, and provide stable light, making them the most commonly used light source in poultry farming. LED lights can adjust light intensity and color temperature according to the growth stages of poultry, meeting various needs. Fluorescent Lights: Fluorescent lights are cost-effective but consume more energy and provide less stable light, which can easily cause stress in poultry. Incandescent Lights: Incandescent lights offer soft light but are energy-intensive and have a short lifespan, gradually being phased out.   3. Light Management Strategies Scientific light management is key to improving poultry farming efficiency. Here are some common light management strategies: Light Duration Control of LED Poultry Lights: For laying hens, a 16-hour light and 8-hour dark cycle is typically used to stimulate egg production. For broilers, intermittent lighting can be applied, providing several short light exposures daily to promote growth. Light Intensity Adjustment of LED Poultry Lights: Poultry at different growth stages require varying light intensities. For example, chicks need stronger light to encourage activity and feeding, while adult birds require weaker light to reduce stress. Color Temperature Selection of LED Poultry Lights: Different color temperatures affect poultry differently. Warm-toned light (e.g., red) promotes calmness and rest, while cool-toned light (e.g., blue) stimulates activity.   4. Future Developments in Poultry Farm Lighting With technological advancements, poultry farm lighting is continuously evolving. Intelligent Poultry Lighting Systems have begun to be used in some large-scale poultry farms. These systems can automatically adjust light intensity and duration based on parameters such as growth stage, environmental temperature, and humidity, achieving precise management. Additionally, new light sources like full-spectrum LED lights are gradually being promoted, simulating natural light to provide a healthier lighting environment for poultry.   Conclusion Poultry farm lighting plays an indispensable role in modern poultry farming. Through scientific light management, not only can the growth rate and egg production of poultry be enhanced, but their overall health can also be improved. With ongoing technological progress, future lighting systems will become more intelligent and efficient, bringing greater economic benefits to the poultry farming industry.  

With the development of science and technology, the conditions of poultry farms are getting better and better. Many modern farms are equipped with intelligent lighting equipment. Among the many lighting control devices, the controller that can be fine-dimming stands out. In the dimmable controller, the fine dimming device is preferred by the farmers.   What are the benefits of fine dimming for poultry farming?     Adjust the regular schedule of poultry ‌ In poultry farming, lights can play a role in regulating schedule of poultry. In the case of insufficient daylight or low temperature, appropriate increase of light can make poultry have a more clear work and rest routine, avoid accumulation phenomenon, and thereby improve their health.   Increases egg production ‌ Properly configured lights can stimulate the secretion of vitellin and gonadotropin in poultry, thus promoting the growth of follicles and promoting egg production. Especially in the case of short daily average light time of less than 10 hours in winter, increasing light can effectively improve egg production, but it should be noted not to over‌.   Regulating the mental state of poultry ‌ Lighting can properly regulate the mental state of poultry, so that poultry can live in a relatively stable environment, reduce the pressure caused by changes in sunshine time, and thus reduce the death rate.   Promote behavioural activity in poultry ‌ The rational use of light can promote the behavioral activity of poultry, so that it can maintain better vitality in daily life, and will not be too lazy.   Reduce pecking and adenomyogastritis in poultry Dark light management can effectively reduce pecking behavior and the incidence of adenomyogastritis in poultry. Excessive light can lead to increased excitability and abnormal secretion of hormones in poultry, which can lead to digestive disorders and increased secretion of gastric acid in the glandular stomach, resulting in aggravated adenomyogastritis. Dark light management can reduce the incidence of these problems.   Improve feed utilization rate of poultry breeding ‌ Dark light feeding helps poultry reduce energy consumption at rest, improve feed conversion and utilization, and reduce feed ratio, which is especially obvious in the process of broiler breeding.   As you can see from the above, fine dimming lighting can bring a lot of benefits to poultry farming. The same effect can now be achieved with our latest products Smart Poultry Lighting Control System. Just combine three products Smart LED Poultry Light Bulbs, Smart Poultry Lighting Control Box, Cable Waterproof Lampholder Connector Line to transform your farm, improving poultry living conditions, and increasing poultry farming productivity.     Note: The picture of chicken farm and data analysis is from the Internet.  

Lighting is especially important for the growth of chickens, mainly reflected in the following aspects.   First, promote healthy growth of chicks.  In the brooding period, lighting not only enables the chicks to see drinking water and feed, but also promotes their healthy growth and improves the survival rate. In the first week, the lighting time can be up to 12 hours a day, with the increase of age, the lighting time gradually decreases, and the lighting intensity gradually decreases, which can prevent the occurrence of pecking.   Second, control the time of sexual maturity. For breeding chickens and hens, reasonable lighting can control their sexual maturity time. To control growth and development and prevent premature sexual maturity ‌, the lighting time of chickens should be short and should not be gradually extended.   Third, increase egg production rate. During the laying period, the length, intensity and cycle of lighting time will affect the physiological rhythm and production performance of hens. It usually takes 16 hours of light a day to reach the full laying potential of hens.   Fourth, affect weight and health. Lighting also affects weight and time to sexual maturity. Reasonable lighting can control the weight of cocks, timely sexual maturity. In addition, lighting also has an important impact on chickens' social interaction, rest and feeding. Reasonable lighting can ensure that chickens get enough feeding, drinking, social interaction and rest.   In summary, lighting is particularly important for the growth of chickens, and reasonable control of lighting time and intensity can significantly affect the growth and development of chickens, sexual maturity, egg production rate and other aspects.    

What are the effects of light on different species of chicken?    Chicks and Broilers  The main function of light is to make them familiar with the environment, and carry out normal drinking and eating. In order to increase the feeding time of broilers and increase the rate of weight gain, the light regime of 23 hours a day and 1 hour of darkness or intermittent light regime ‌ is generally adopted. The use of Chicken Farm LED Poultry Light Bulb can ensure the uniform brightness of the chicken house environment and promote the drinking and eating of chickens.   Grown chickens The sexual maturity time of chickens can be controlled by reasonable illumination. Reducing light exposure can delay sexual maturity, make the weight of chickens reach the target at sexual maturity, and improve egg production potential. Using Chicken Farm LED Poultry Light Bulb increases the light, shortens the sexual maturity time of chickens, so that chickens can reach sexual maturity in time.    Hens ‌ Increasing light and maintaining a considerable length of light time (more than 15 hours) can promote normal ovulation and egg production of hens, and enable hens to get enough time for feeding, drinking, socializing and rest, and improve production efficiency. The use of Poultry Lighting LED Poultry Light Bulb used in combination with Smart Poultry Lighting Control System can increase the duration of light and promote hen ovulation and egg production.   Cocks The weight of cocks can be controlled by proper lighting and timely sexual maturity can be achieved. After 20 weeks of age, about 15 hours of light a day facilitates sperm production and increases semen volume.  

It is widely believed that 24-hour light maximizes the performance and health of chicks. But is 24-hour light really good for raising chicks?   Numerous studies have shown that chicks, like all living things, are born with a 24-hour body clock. This clock can be seen at work by observing the eating and drinking activity of chicks during the first few days of their lives. Even if 24-hour light is provided, the chicks will still drink and eat more during the day ‌ than at night.   What are the specific effects of 24-hour light on chicks?   1. Circadian Rhythm: Chicks show nearly identical circadian rhythms during the first few days of life, with significantly higher water and food intake during the day than at night. This pattern persists even with 24 hours of light. 2. The Need for Dark Periods: Studies have shown that poultry need to have at least four hours of continuous darkness to really benefit from the dark period. Without dark periods, chicks' circadian rhythms may become out of sync.   Alternative Solution In order to promote feeding and growth of chicks, strategies can be used to gradually reduce the time of light: Week 1: 24 hours light. ‌Week 2: 20 hours of light. ‌Week 3: 18 hours of light. ‌Week 4: 16 hours of light. ‌From week 5: Taper down to 8 hours of light per day ‌ In addition, the light can be stopped from time to time for 1 hour at night to exercise the adaptability of the chicks to the dark and avoid the upset of the chickens due to power failure.   Using our Hot-selling LED Poultry Light Bulb and Smart Poultry Lighting Control System, you can easily control and adjust the lighting time, achieve intelligent management of lights, and better care for the growth of chicks.     Special Notice: The information and picture above are from the Internet, not original.  

In modern society, more and more attention is paid to saving energy and reducing carbon emissions. With the increasing demand for energy conservation and emission reduction in the global market, the market demand for high light efficiency chips is also growing.   What are high light efficiency chips? High-efficiency chips ‌are those that produce more light output for the same amount of power and are commonly used in lighting and display devices. This kind of chip has the advantages of high luminous efficiency, energy saving, environmental protection, long life, etc., and is a high-performance component commonly used in modern electronic equipment.   What are the technical characteristics of high light efficiency chips? 1. High Luminous Efficiency: Can efficiently convert electric energy into light energy, reduce energy consumption. 2. Energy Saving and Environmental Protection: The use of high light efficiency chips can significantly reduce energy consumption and reduce carbon emissions. 3. Long Life: Compared with traditional light sources, high light efficiency chips have a longer life, reducing replacement frequency and maintenance costs. 4. Small size: High light efficiency LED lights are small in size and suitable for installation needs of various application scenarios.   High Light Efficiency LED Farming Light In terms of lighting, high light efficiency LED lamps have better energy-saving effects and longer service life than traditional incandescent lamps and energy-saving lamps. For example, after the use of high light efficiency chips, our LED Poultry Farming Light products have been upgraded to High Light Efficiency LED Poultry Farming Light products. It can efficiently convert electric energy into light energy, reduce the loss of electric energy into heat energy, improve the overall energy efficiency, and thus reduce energy consumption. The bulbs have a long service life, can work tens of thousands of hours continuously, reduce the cost of replacement and maintenance. This is an outstanding example of Environmental Friendly LED Poultry Farming Light.    

Laying hens are chickens raised specifically to lay eggs for the supply of eggs. The main task of raising laying hens is to improve egg quality and maintain or increase egg production. Laying hens breeds should be selected robust, disease resistance, foraging ability, good egg quality, high egg production rate, and coarse feeding, adapt to the local environment of the local chicken.   The laying rate of hens is very important to farmers. However, sometimes the egg production rate will decrease for some reasons, resulting in economic losses for farmers. So, what causes the decrease in laying rate of hens?   There are many reasons for the decrease in laying rate of laying hens, and the following are some of the main factors.   Environmental Factor 1. Temperature change. Too high or too low temperature can affect the laying rate of hens. For example, high temperature in summer will lead to reduced feed intake and insufficient nutrient intake of laying hens, which will affect egg production. Cold winter may cause cold stress and physiological disorders. 2. Humid environment. Excessive humidity not only affects the normal metabolism of laying hens, but also may breed harmful microorganisms and cause diseases. 3. Poor ventilation. Poor ventilation facilities or insufficient ventilation will lead to the accumulation of harmful gases (such as ammonia, carbon dioxide, etc.) in the house, affecting the health of laying hens and reducing the laying rate.   Nutritional Factor 1. Feed quality. Poor feed quality, moldy deterioration or contamination will reduce the palatability of feed, reduce the feed intake of laying hens, and lead to a decrease in laying rate. 2. Nutrient deficiency. Insufficient protein, vitamins, trace elements and other nutrients in the feed will affect the normal physiological function of laying hens, and then affect the laying rate. For example, the imbalance between calcium and phosphorus can affect the formation of eggshells. 3. Feed mutation. Sudden change of feed will lead to digestive dysfunction of laying hens, resulting in indigestion, which will affect the laying rate.   Disease Factor 1. Infectious diseases. Chickens infected with infectious diseases such as avian influenza, Newcastle disease, infectious bronchitis, etc., can lead to a sudden decline in egg production. These diseases not only affect the egg production rate of laying hens, but also can cause a large number of chicken deaths. 2. Bacterial diseases: Bacterial diseases such as colibacillosis and salmonellosis can also affect the egg production rate of laying hens. 3. Parasitic diseases: Parasitic diseases such as coccidiosis and filariasis can also have a negative impact on the egg production rate of laying hens.   Management Factor 1. Poor feeding management. Feeding is not fixed time and quantity, insufficient drinking water, equipment damage and other feeding management problems will lead to a decrease in laying rate. 2. Stress factors. Stress factors such as abnormal noise, the presence of strangers, vaccination or deworming treatment can also reduce the laying rate of laying hens. 3. Unreasonable light. Insufficient light time or insufficient light intensity will affect the physiological function of laying hens, and then affect the laying rate.    Now, let's increase egg production in a very simple way. By using our latest research and development product High-tech Intelligent Poultry Lighting Control Box 6020 connected to the Safe LED Poultry Light Bulbs, the farming farmer can adjust the lighting time and brightness to improve lighting condition, then improve the laying rate of laying hens.      The source of the above reason analysis: CNBIU(a Chinese We Chat Official Accounts)

The voltage drop ‌ is the decrease in voltage caused by the presence of resistance when the current passes through a resistor or conductor in a circuit.   The voltage drop is mainly caused by the following reasons. 1.‌Resistor. ‌When the current passes through the resistor, the resistor consumes part of the electric energy, which is converted into heat energy, resulting in lower voltage. 2.Current. The higher the current, the greater the voltage drop. 3.Wire length. The longer the wire length, the greater the resistance, the greater the voltage drop. 4.Wire cross-sectional area. The larger the cross-sectional area of the wire, the smaller the resistance and the smaller the voltage drop. 5.Wire material. Wires of different materials have different resistivity. The greater the resistivity, the greater the resistance, and the greater the voltage drop.   Voltage Drop will have a variety of effects on the lamp ‌, mainly including the following aspects of the impact. 1.Brightness drop. When the voltage is below the appropriate level, the brightness of the bulb will decrease. This is because the resistance in the bulb causes the voltage to be distributed to various parts, resulting in insufficient voltage, and the bulb cannot emit enough light. ‌2.Shortened life. Low voltage will cause the life of the lamp to be shortened. The lamp needs more current in the case of low voltage to emit enough light, which will accelerate the aging of the resistance, wire, circuit board and other parts of the lamp, thus shortening the service life of the lamp. 3.Flicker and burn. When the voltage is low to a certain degree, the bulb may flicker and even burn. This is because the lamp needs more current to drive in the case of insufficient voltage, and the temperature will rise, which is easy to cause short circuit or overload, resulting in the lamp burned.   The effect of the voltage drop problem on lighting is universal, including on farm lighting. And this impact will cause direct economic losses to farmers. Is there any way to avoid this effect?   The answer is yes. After the unremitting efforts of the company's research and development team, we finally developed a Smart Poultry Lighting Control System that can not be affected by the voltage drop. The control system is equipped with self-developed drive power supply and control system. The problem caused by voltage drop to lamps has been completely solved. This control box can not only adjust the brightness and timing of the light, but also realize the sub-area control of the light. The farmers who use Intelligent Poultry Lighting Control System are extremely satisfied with the convenience it brings to the farm.  

The importance of the color of light to chickens is mainly reflected in its impact on the physiological function, growth, development and egg production rate. The specific effects of different light colors on chickens are as follows.   White Light White light can promote the growth and development of chickens, increase muscle, fat and other components, improve body weight, and also promote the laying rate, laying amount and hatching rate.   Red Light Red light can relieve tension in chickens and promote sleep, but it can inhibit the growth rate of chicks and young chickens, delay sexual maturity, and reduce the fertilization rate of breeding cocks.   Green Light Green light can regulate the body metabolism and immune system of chickens, but it can inhibit the laying performance of adult hens and reduce the laying rate and hatching rate.   Blue Light Blue light can improve chicken immunity and promote growth, but it is easy to induce chicken pecking, and reduce the disease resistance of chickens at all ages.   Yellow Light and Orange Light These colored lights increase sexual maturity and egg weight, but yellow lights decrease egg production in adult hens.       In summary, the importance of the color of light to chickens lies in its influence on many aspects such as physiological function, growth, development and egg production rate of chickens. Reasonable selection and use of different colors of light can effectively improve the efficiency of raising chickens.